 A unique miter gauge accessory for the router table, designed to be mounted to the backside of your fence. It slides smoothly across the table on chrome plated steel bars. Engineered to perform precise square or angled cope cuts, crosscuts and more, the Mite-R-Slide offers greatly improved performance and increased precision over similar cuts made with a standard gauge.
 |
» The miter gauge rotates 45° in both directions
» Features positive detents every 5°, including a 22-1/2° position
» The fence on the miter gauge features a heavy-duty aluminum extrusion
» T-track along the top face for attaching stops and hold-downs
» Locks into position easily with the twist of two solid brass knobs
» Includes a replaceable sub-fence
» Head and fence can be rolled up over the bar and positioned behind fence when not in use
» Primary fence not included |
 JessEm™ router table fences glide smoothly in tracks and anchor firmly with a twist of the molded lock-down knobs. It is a precision machined aluminum extrusion with red anodized finish. The PVC coated MDF fence face adjusts for varying bit diameters and has extruded shim-bars for jointing type operations. There are two 1/4" T-tracks above the fence faces for anchoring accessories. The molded 2-1/4" dust collection port mates with most shop vacuum hoses. It fits router table tops from 24" to 32" wide and 1/2" to 1-1/2" thick.
|
» Precision machined aluminum extrusion with red anodized finish
» PVC coated MDF fence faces adjust for varying bit diameters
» Extruded shim-bars for jointing type operations
» Fits router table tops from 24" to 32" wide and 1/2" to 1-1/2" thick
» Molded 2-1/4" dust collection port mates with most shop vacuum hoses |
 The Zip Slot Mortise Mill features a uniquely designed drill bit and hardened guide bushing that is pressed into a bearing. Simply use the guide bushing to guide the drill bit while you oscillate the bit back-and-forth with the lever system. Includes a 3/8" guide bushing with bearing, a special 3/8" drill bit, a stop collar, sample 3/8" x 1-1/4" hardwood tenons and detailed instructions.
|
» Make a mortise-and-tenon joint fast using a portable drill
» Wood Magazine’s Editor’s Choice for Top New Tools 2009!
» Includes a 3/8" guide bushing with bearing, a special 3/8" drill bit, and stop collar
» Includes sample 3/8" x 1-1/4" hardwood tenons
» Comes with detailed instructions |
 Now you can adjust router height with machinist's precision and easily change bits, all from above the router table. Each turn of the crank precisely raises the bit 1/16" and a calibrated gauge marks incremental adjustments as fine as 1/512" (less than 0.002").You can even raise the motor to access the collet from above the table for easy bit changes.
Your router can be removed and replaced in seconds, without tools, through the use of a cam-action clamping mechanism. This clamp is sized for 3-1/2" diameter motors (Porter-Cable 690 and 890 series, Bosch 1617 and 1618 series, and DeWalt 610 and 618 series) and rides on heavy-duty bearings that slide up and down on precision machined solid steel posts. |
|
The Rout-R-Lift FX includes a 9-1/4" x 11-3/4" router plate machined from 1" phenolic with a 3-1/2" opening that accepts the included phenolic insert to close the hole to 2" for smaller bits. This plate will fit JessEm, Woodhaven, Woodpecker, and many other router tables. Eight set-screws are located around the perimeter of the plate to bring the plate flush with your router table surface. Includes: insert wrench, starting pin, detailed instructions. |
 Easily attach this JessEm™ steel router table stand to the Mast-R-Top for a complete and incredibly strong router table.
Assembly is simple, and it includes riveted steel nuts to accept the bolts needed for assembly. 35" high without a table top. Easily attaches to the JessEm phenolic router table top (143224).
System includes Mast-R-Lift with medium plate (143613), phenolic router table top (143224), Mast-R-Fence and steel router table stand.
|
Back | Arizona Specialty Woodcrafts | Privacy | Resources | Site Map | About Us | Contact Us | Bookmark Us