~ in association with Amazon.com
Surface Planers & Molders |
|
 This planer has all the features you are looking for at an affordable price.
Features include:
» 3-horsepower, 220-volt, Single-phase motor
» Internal thermal overload safety switch
» Table size: 15" x 20" - 15" x 42" with wings
» 2-speed gear box: 16 FPM and 30 FPM
» Pedestal mounted controls
» Maximum cutting depth: 1/8"
» Feed rate: 16 FPM & 30 FPM
» Cutterhead diameter: 3"
» Knives: 3 (HSS)
» Cutterhead speed: 5,000 RPM
» Power feed rollers: solid serrated steel |
|
 JET's planer/molder handles material up to 13 inches wide and up to 6 inches in height. The tool's 1-1/2-horse, 110-volt motor (you can easily rewire it to 230 volts) spins the three-knife cutterhead. Depending on the application, the machine runs 10 to 20 board feet per minute.
Features include:
» Sturdy cast-iron table
» Reduced vibration
» Adjustable infeed/outfeed
» Motor located at base
» Comes with stand |
|
 This new design 16" woodworking planer is powered by a 3hp totally enclosed fan cooled motor with magnetic switch. Power is delievered to the 3 knive 2 7/8" cutterhead by three V-belts.
The unit is both cast iron and steel construction for stability and durability.
There are two feed rates, 16 and 20 feet per minute, serrated infeed rollers and smooth outfeed rollers are standard.
Angled 4" dust port positions the hose away from work area and provides efficient chip and dust collection. |
|
 Compact and lightweight for easy transporting to the job-site. Fastest and easiest blade change system on the market; uses disposible double edge blades. Quietest (83dB) planer in its class. 4-post design and diagonal cross supports for stability.
Features include:
» Compact and lightweight for easy transporting to the job-site
» 15 amp motor delivers no load speed of 8,500 rpm
» Table size of 13 by 30-3/8 inches
» Patented Interna-Lok automated head clamp minimizes snipe
» Supersize infeed and outfeed tables maximize work support |
|
Features include:
» Three knife cutter-head for superior surface finish
» 96 cuts per inch for a smooth finish
» Extra-large folding tables and a four column carriage lock minimize the movement that causes snipe
» One tool knife change system allows the user to easily seat new knives
» M2 laminated knives are disposable and reversible |
|
 Powerful 15 AMP, 20,000 RPM motor (10,000 RPM cutterhead speed) that handles larger cuts in wider materials with ease. The three knife cutter-head delivers 30% longer knife life and makes knife change faster and easier.
Features include:
» Two speed gear box allows users to change feed speed to optimizing cuts per inch at 96 or 179 CPI
» Fan-assisted chip ejection vacuums chips off of the cutter-head and exhausts them out of the machine
» Includes infeed and outfeed tables and an extra set of knives |
|
 If it's time to step up from your benchtop planer, here's one to consider. Powermatic's 15-incher features huge, smooth-as-glass infeed and outfeed tables of cast iron and a newly design spiral cutterhead that offers a cleaner finish than traditional knives.
Features include:
» 13,500 cuts per minute
» Three high-speed steel knives
» Digital readout
» 3 hp (TEFC) motor
» Kit includes planer, dust hood, handwheel, handle, knife adjustment tool, two extension tables, seven wrenches, three bags of fasteners, owner's manual, and warranty card |
|
 The new PM15 from Powermatic is loaded with features that make it a standout. Large 5HP motor gives the unit 15" wide planing capacity and enough power to run double knife sets for molding. The stand is fully enclosed and is equipped with integral casters for shop mobility.
Features include:
» Heavy-Duty cast iron table
» Plane or Mold capabilities
» Magnetic Controls
» 3 Knives in cutterhead
» 5hp 1ph 230 volt motor |
|
 Wide, sold wood panels? No problem! Durability, dependability and capacity are the hallmarks of this massive machine.
Features include:
» Cutterhead motor: 5 H.P., 220V, 25 amps, single phase
» Heavy-duty cast iron construction throughout
» Maximum cutting height: 8-1/4"
» Maximum cutting width: 24"
» Table is precision-ground cast iron |
|
 A smooth finish at a very affordable price. This 12-1/2"-inch planer offers excellent results in a simple and reliable design. The four-post cutterhead support system keeps the cutterhead aligned for proper planning. The ball-bearing construction assures smooth operation and longer tool life. The quick change high-speed steel knives are double-sided for twice the cutting life. A handy stock roller lets you pass stock over the planer. The 15 amp motor provides the maximum power for efficient cutting action. The feed rollers are driven by a chain and sprocket drive and adjust the feed rate under load for the best planing results. Folding, adjustable infeed and outfeed tables allow for easy carrying and storage. Includes planer, knife-setting gage, wrench, and instruction manual. |
  |
Back | Arizona Specialty Woodcrafts | Privacy | Resources | Site Map | About Us | Contact Us | Bookmark Us