|
|
 |
 |
 Lube Finished Screws |
| Application: Great for most standard interior applications. Choose from either Square Drive or Square-X Screws. |
| Lube finish reduces friction for easier installation. |
| Head: Flat Head |
Thread: Deep Thread |
Size: #6, #8, #10 |
 Trim Head Square Drive |
| Application: Trim Molding |
| Finish nail look with the power of a screw. |
| Head: Small 3/16" trim Head |
Thread: Deep Thread |
Size: #6 |
 Slide Mounting Screws |
| Application: Ball bearing slides and catches, drawer slides, shelf supports |
| Low profile head won't interfere with guide operation. Strong holding power. |
| Head: truss Head |
Thread: Deep Thread |
Size: #6 |
 Truss Head break Away |
| Application: Knobs and Pulls |
| breaks away in 1/4'. Great where length of screw is not pre-determined. |
| Head: truss Head |
Thread: Machine Thread |
Size: #8 |
 Drawer Pull Screws |
| Application: Used for drawer knobs and pulls |
| Holds knobs and pulls secure |
| Head: truss Head |
Thread: Machine Thread |
Size: #8 |
 Kreg Washer Head Face Frame Screws - Coarse |
| Application: Pocket screw joints & general purpose |
| Self-drilling feature. Large bearing surface helps prevent overdriving |
| Head: Washer Head |
Thread: Coarse (for softwoods) |
Size: #8 |
| Kreg Washer Head Face Frame Screws - Fine |
| Application: Pocket screw joints & general purpose |
| Self-drilling auger tip feature. Large bearing surface helps prevent overdriving |
| Head: Washer Head |
Thread: Fine (for hardwoods) |
Size: #7 |
 Large Round Washer Head Screws |
| Application: Drawer fronts |
| Washer head covers oversized hole in drawer box, allowing for drawer front adjustment |
| Head: Large Washer Head |
Thread: Deep Thread |
Size: #8 |
 Painted Head Screws |
| Application: Hanging Cabinets |
| Helps screw heads "blend in" when hanging white melamine, painted plywood or natural wood cabinets |
| Head: truss Head |
Thread: Deep Thread |
Size: #10 |
 Solid brass Screws |
| Application: Decorative complement to solid brass hardware |
| Polished and lacquered to prevent tarnish. Decorative. |
| Head: Flat Head |
Thread: Wood Screw Thread |
Size: #2, #3, #4, #5, #6 |
| Confirmat Screws |
| Application: Particle board |
| Large bore and extra-coarse threads offer superior hold in particle board. |
| Head: Pan Head or Flat Head |
Thread: Deep Thread |
Size: 7mm x 2" or 7mm x 2-3/4" |
Back to Top
 |
 Kreg Blue-Kote Weather Resistant Screws |
| Application: Exterior pocket hole joinery, furniture and construction |
| Three anti-corrosion layers produce exceptional weather resistance. Auger tip |
| Head: Washer Head |
Thread: Coarse Thread |
Size: #8 |
 Kreg Stainless Steel Pan Head Screws |
| Application: Exterior pocket hole joinery, furniture and construction |
| Recommended for cedar and treated lumber. Auger point for extra fast start |
| Head: Pan Head |
Thread: Coarse thread |
Size: #8 |
 Woodmaster Exterior Screws |
| Application: Decks, outdoor furniture |
| Durable Ultra Seal finish for tough exterior conditions. Rated 500 hrs of salt spray protection. Not recommended for ACQ pressure treated lumber |
| Head: Flat Head |
Thread: Serrated Deep Thread |
Size: #8, #10 |
|
Back | Arizona Specialty Woodcrafts | Privacy | Resources | Site Map | About Us | Contact Us | Bookmark Us